All Service Prices are for Labor only and do not include possible or necessary replacement of parts, unless parts are specifically listed as included. Parts may be provided by customer.
Please note:
1. There are many factors that will affect the overall cost of a repair.
2. All prices may change without notice.
SET UPS:
$50: Electrics/ Acoustics/Bass Guitars
$65: 12-string Guitars
$65: Nylon String Guitars
$65: Guitar with Floyd Rose (or similar) Trems.
Note: Strings are not included in Set-ups and must be purchased or provided.
Includes: bridge/saddles height adjustments, Truss rod adjustment, set intonation, set pickup height, tighten all screws and nuts, clean and oil fingerboard, lubricate where necessary (e.g. machine heads, bridge trem pivot screws, etc.), clean and polish guitar. Setups should be done with new strings, but not necessary if strings a relatively new. New strings are stretched out to stabilize tuning.
$30: Restringing with no set-up
Installations/Replacements:
Nuts:
Choose Bone, Graph Tech/Tusq or Other
$65 (plus material cost).
$90: For 12-string guitar (plus material cost).
$120: Total Intonation Compensated Custom cut nut string slots (plus material cost: bone or teflon impregnated material).
Bridge Saddles
(includes trimming, fitting, and intonation compensation)
$100: Total intonation Compensated Custom cut bridge saddle with a Total Intonation Compensated Custom cut nut
$60: For Acoustic Bridge. Standard intonation Choose Bone, Graph Tech or Other
$60: For Strat/Tele style saddle: Choose original style, Graph Tech String Savers
$75: for 12-string Guitar: Choose Bone/Graph Tech or Other
Hardware Installs/Replacements
Bridges: Electric guitar hard-tail or strat style trem bridges $45
Routing for a Floyd Rose style trem $100
Machine Heads: $45
Strap Buttons: $15
Strap Lock (or similar): $20
Pickups:
Installation includes standard wiring and soldering to controls, application of contact cleaner to control potentiometers and switches.
$55: For one pickup
$85: For two or more pickups.
*Add $30 if on archtop/F-hole guitar
$30: Pickup Rings installation
Pickups Requiring Routing: add $50 per pickup
Pickups Requiring Complex wiring schemes: add $50
Acoustic Guitar under saddle Piezo element (only) install (Does not include element): $50.
Fishman or K and K complete pickup systems installs (call for specific models): $75
Add $40 With Pre-amp install and end-pin jack
Electronics and Parts Replacement
Switches: $45 for all styles
Potentiometers: $45
Output Jack: $45
*Add $15 per component on Artchtop/F-hole guitar
Clean Electronics: $30
Pre-wired Pickguard Install: $60
Shield Pickup/Guard and Control Cavity $80
Battery Box Install: $60
Complete Re-wiring with all new components, wire and output jack : $180—————————————-Note: add $30 for Archtop guitars.
Repairs
Reglue Broken Headstock (sanded smooth with no finish work, repair may be visible)
Repair with no splines needed: $60
Repair with splines needed: $150.00
Cracks Repairs (includes gluing, and internal cleating if necessary): $20 per inch
Acoustic Bridge: Remove and Re-gluing existing bridge to guitar top $100
Acoustic Bridge Replacement: $150 with new generic bridge, plus fee for new Saddle install——-Note: If original bridge is wanted, it may have to be hand-made, and thus much more costly————–Bridge must be examined first.
Replacing Bridge Plate: $150
Alternative: Re-enforce Existing Bridge Plate with the Plate Mate: $50
Note: The above may require a Set-up (not included)
Fret/Fret Board Work
Level/Crown, and Polish (Does not include Nut or Bridge adjustments): $150
Spot Level High frets: $25 per fret
Glue/Reseat existing loose Frets (Does not include possible fret Leveling): $25 per fret
Re-fret work-replacing one or more frets with new fret-(Does not include possible fret Leveling): $30 per fret
Complete Re-fret Without Binding (Does not include possible Fret Board Planing): $14 per fret
Complete Re-fret With Binding (Does not include possible Fret Board Planing): $16 per fret————————-Note: May require new nut (not included)
Re-fret with stainless steel or EVO: add $80 to total cost
File Fret Ends Smooth Caused By Dehydrating of Fingerboard: $30
Bench Fee to Diagnose problems if not part of repair work: $40
*Please call for any services needed that are not listed